Nanodynamite at BEAR beamline in Elettra, Trieste, Italy. Assoc. Prof. Dr. Paul Winkler (left) and Dr. Miguel Vázquez Pufleau (right) (November 2018).

VUV SANC (Vacuum Ultra-Violet Size Analyzing Nuclei Counter) water cooled automated experimental chamber connected to UV synchrotron light and red laser for the in situ determination of aerosol growth rate (November 2018).

Aerosol generation side to feed the VUV SANC with constant concentration monodisperse NaCl aerosols (November 2018).

Pressure, red laser transmission, 30° UV and red laser scattering data collection and visualization for each automated adiabatic expansion in the setup, with Miguel (November 2018).

Tour de synchrotron 1: at ID02 SAXS beamline at ESRF in Grenoble (July 2018).

Tour de synchrotron 2: nanoDynamite takes a break in Versaille (July 2018).

Tour de synchrotron 3: set-up at Swing beamline at SOLEIL (July 2018).

Tour de synchrotron 4: nanoDynamite at SOLEIL (July 2018).

nanoDynamite science retreat in Innsbruck: visit of the Innsbruck Atmospheric Observatory at the Institute of Atmospheric and Cryospheric Sciences, 2018-01-15.

Groundstation (Schwechat), 2017-08-09.

CLOUD data workshop, May 29th - June 2nd.

CLOUD data workshop, May 29th - June 2nd.

CLOUD data workshop, May 29th - June 2nd.

CLOUD data workshop, Monday, 2017-05-29.

(photo: © J. Krpelan)

ERC Talk in Vienna, 13-03-2017.

DMA-train goes Cyprus, 02-23-2017.

On top of the tube of the LHC @ CERN, 10-28-2016.

Shipping the DMA-Train, 09-26-2016.

Bernhard and Paulus @ Elettra near Trieste, 09-24-2016.

The Nanodynamite-Team (Christian T., Paul W., Dominik S., Andrea O.) took part at the Vienna City Marathon 2016 on April 10th, 2016.
Click here for the results.

Top view of the DMA-Train.

Overview over the setup of the CLOUD 10 campaign.

Paul Bauer at the DMA-Train in operation on the current CLOUD 10 campaign.

Transportation of the DMA train to the CLOUD chamber at CERN, Geneva (September 2015).

Dr. Paul Winkler and Paulus Bauer greasing the sampling port (July 2015, Elettra).

Dr. Paul Winkler inserting the inner flow tube (July 2015, Elettra).

Full flowtube setup with air switching module at the SAXS beamline at Elettra (July 2015, Elettra).

Showcasing the new DemoSANC at the Campus Festival (June 12-14, 2015).

 
(photo: © Dominik Stolzenburg)
DMA train now in operation at the CLOUD chamber at CERN, Geneva (May 2015).

Milestone-Event DMA-Delivery and DMA-Train-Pumprack-Delivery by Grimm Aerosol Technik (Feb. 2015).

Milestone-Event DMA-Delivery and DMA-Train-Pumprack-Delivery by Grimm Aerosol Technik (Feb. 2015).

Milestone-Event DMA-Delivery and DMA-Train-Pumprack-Delivery by Grimm Aerosol Technik (Feb. 2015).

Grimm Aerosol nanoDMA. This DMA will be used six times in the final DMA-Train setup ((Feb. 2015)).

Grimm Aerosol HV-Unit for DMA HV-supply (Feb. 2015).

Grimm Aerosol pump rack for the DMA sheath air supply (Feb. 2015).

Six Condensational Particle Counters (CPCs) running in parallel (Jan. 2015).

DMA-Train in the first construction phase during december 2014 and a corresponding design study.

Setup for biogenic aerosol deposition with CPC and DMPS measurement system.

Laminar flow condition testing with a laser and fume inside the inner tube and pure air as sheath air.

Assembling steps of the final flow tube setup with an aluminum holding for the SAXS system at Elettra.

Assembling the setup at the SAXS beamline at Elettra.

X-ray beam adjustment with green paper (dark green line is the beam).

Dr. Paul Winkler with the flow tube and the CPC and DMPS measurement system.

Complete flow tube setup with vacuum connection.

New adjustments at the beam line with air cleaning modules (black tubes).

Automatic air flow switching module with Paulus Bauer and Dr. Heinz Amenitsch.